Weird Cards You've Pulled

pulled a combee UD with a white circle on its right head.
very interesting printing error
 
If you guys could take pictures and upload them, I'm pretty interested in seeing these misprints.
 
I once pulled 2 cards that had a white line going horizontally through them. I remember that one was an arbok. I think there printer ran out of ink or something!
 
I got some packs at league and all the cards inside had half of one card and half of another. Unfortunately, there were no holos. I can't provide a picture because I traded them away for a bunch of deck stuff.
 
my mate pulle a pack where every single card was folded in the top left corner. like folded over then packed. you couldnt notice anything from the outside of the pack.

also i got a secret wonders pack with an elecivire that had a big dent in it
 
I have a flower shop lady where the back was full of white spots
Unfortunately i cant provide a scan. :(
 
Oh, I love this topic!!! (I'll see if I can upload pictures later...)

Meaty (basically traded me) a Palkia from GE that's half reverse holo.
I pulled a Mr. Mime 4 with a smudge that makes it look like it's using Psychic.
Once, in a booster pack, all the commons were upside-down.
 
Y'all don't need to use a scanner. Take a picture and upload it via imageshack or whatever. It just keeps this thread moving with discussion.
 
when i was younger i opened a pack which had no rare in it. that was quite annoying. i remember telling my dad and he said well its a rare so surely your not guarenteed one. i told him you get a rare in every pack then he said not very rare then are they.

He knew nothing of pokemon lol,
 
I just bought the Entei and Raikou tins today, and in one of the PA packs I pulled a reverse holo Kabutops that had one side of the border wider than the other. The border on the left side of the card is 3mm long (horizontally), while the side on the right is only 2mm long. I also found that I have a Luxray GL that is the same way except the left side is 2mm and the right side is 3mm.

~A+G
 
I have a rather odd Aquapolis Lanturn...the uncommon one. Here is what it should look like: Lanturn

And here's what mine looks like:

1002101716.jpg


Yeah, I have poke-body print even though it doesn't have one.
 
"~Absol+Gallade~ - 10-02-2010 07:04 PM
I just bought the Entei and Raikou tins today, and in one of the PA packs I pulled a reverse holo Kabutops that had one side of the border wider than the other. The border on the left side of the card is 3mm long (horizontally), while the side on the right is only 2mm long. I also found that I have a Luxray GL that is the same way except the left side is 2mm and the right side is 3mm.

~A+G "
Click to expand...

ive also found some "uncentered" cut cards. seems to be an alignment problem.
my ninetales hgss is cut too low. so its top border is 1mm smaller than the bottom.
 
i have a munchlax from rr with the top screwed up and spiked 0_o

and i also have a blank card
 
Has anyone ever heard of a set of promos that have a little snowflake stamp in the bottom left corner of the picture?
 
can you provide a picture of the card?

I know those Pokemon Rumble cards there set symbol sorta looks like a snowflake

I have a Majestic Dawn Pikachu card with a Red dot above the Pikachu
 
You must log in or register to reply here.
Back
Top